深海DSE333，深海DSE334，深海DSE335，ATS

Deep Sea Electronics pLC DSE335 AUTOMATIC TRANSFER SWITCH ConTROLLER

The DSE335 is an Automatic Transfer Switch Controller. The DSE335 will monitor the voltage and frequency of the incoming AC supply from two different sources, which could be from both generator

or mains (utility), or a combination of both. The module will monitor S1 (source 1) and in the event of a failure will issue a start command to S2 (source 2).

once S2 is available and producing an output within limits, the module will control the transfer device and switch the load from S1 to S2. once the S1 supply returns to within limits, the module will command a load return to S1 and shut down S2.

Various timing sequences are available to prevent nuisance starting on minor supply breaks.

The DSE335 supports many topologies and features include mains (utility) rated volt-free relays,

a clear back-lit LCD 4-line text display, showing system status and warnings and red and green LEDs

indicating operational status.

The module includes USB, RS232 and RS485 ports as well as dedicated DSENetterminals for

system expansion, this gives features such as remote pC monitoring and SMS text alerts (with external modem).

The module can be easily configured using the DSE Configuration Suite pC Software.

Selected front panel editing is also available.

Configurable inputs and outputs make the DSE335 fully flexible to suit a wide variety of applications.

When there is no DC supply, a compatible self-seeking power supply is available (DSE160).

Configurable inputs (12)

Configurable volt-free outputs (6)

Configurable DC outputs (6)

4-Line back-lit LCD text display

Five key menu navigation

LED and LCD alarm indication

Deep Sea Electronics pLC英国深海DSE335自动转换开关控制器

DSE335是一个自动转换开关控制器。该DSE335将来自两个不同来源的，可以是从两个发生器监视传入AC电源的电压和频率或电源（程序）或这两者的组合。该模块将监视S1（源1），并在事件发生故障会发出开始命令到S2（源2）。 一旦S2是可用的，并产生范围内的输出，该模块将控制转移装置和切换负载从S1到S2。一旦S1电源返回到范围内，该模块将获得负载返回S1和关闭S2。 该DSE335支持多种拓扑结构和功能包括电源（实用程序）额定电压自由继电器，清晰的背光LCD 4行文字显示，显示系统状态和警告，红色和绿色LED 指示工作状态。 该模块包括USB，RS232和RS485端口以及用于专用DSENet终端系统的扩展，如远程电脑监控和短信提醒（与外部modem）。该模块可以很容易地使用显示屏幕设备配置套件pC软件配置。 选择前面板编辑也可用。 可配置的输入和输出使DSE335完全灵活地适应各种应用。

可配置的输入（12），可配置的无电压输出（6），可配置的DC输出（6），4行背光LCD文本显示屏

五键菜单导航，前面板编辑与pIN码保护，LED及LCD报警指示，检查同步功能，远程监控

电源之间自动切换，可配置的定时器和报警，USB连接，备份的实时时钟

通过显示屏幕配置套件pC软件，可配置的显示语言，用户可选RS232和RS485通讯

SMS短信（额外的外部调制解调器需要），附加显示屏，以帮助调制解调器诊断，集成的pLC编辑器

公司拥有从业十几年经验丰富的资深工程师以及完善的服务体系，公司常备大量现货供应，欢迎与我司联系,我司将热诚为您服务。http://www.sourcepower.cn;tel:0754-88739001;13556343315;E-Mail:13556343315@139.com;咨询QQ：49960677